This video shows the full assembly of a dual axis swing tie rod hydraulic cylinder. It begins by fitting O rings into the piston grooves, then adding the support ring and guide ring. The main piston seal—a red Glyd ring with backup ring—completes the piston assembly. A set screw locks the piston in place. The unit is inserted into the barrel, followed by the front flange, tie rods through the end cap, rod bolts, and hand-tightened nuts. A hydraulic hose connector is attached, nuts are torqued, and red dust caps cover the ports. The finished cylinder is then displayed.
The process addresses a key challenge: maintaining rod alignment while inserting the piston seals without damage, which is critical for smooth swing motion and leak free operation. For technicians, it provides a clear assembly sequence. For procurement engineers, it reveals the maker’s precision and process control. Such cylinders are used in steering linkages, indexing tables, and robotic joints where controlled oscillation is needed. When sourcing a dual axis swing tie rod hydraulic cylinder, this video serves as both an assembly guide and a quality reference. It also emphasizes correct seal installation and torque discipline, helping avoid premature seal failure and uneven wear.
